This production line utilizes fully automated CNC technology to weld steel bars into mesh products. Therefore, it is no only speedily but precisely. The products are widely used in many areas such as: civil, public, construction, highways, hydraulic, bridges, container terminals, and airport runways and so on engineering projects. For mesh dimensions bigger than 10 cm and with increasing in increments of 50 mm, this production line can guarantee weld mesh quickly, smoothly and seamless transitions from one welding dimension to the next one. The most critical feature of this system is its ability to weld steel mesh with both precision and speed, ensuring consistent and high-quality output.
1, Longitudinal Wire Coil Mount Rack;
2,Tail-end Sensor;
3, Longitudinal Wire Pre-Strengthening;
4,Longitudinal Wire Feeding;
5, Longitudinal Wire Feeding Buffer;
6, Longitudinal Wire Post-Strengthening;
7, Main Mesh Welder;
8, Automatic Transverse (Cross) Wire Feeding;
9, Mesh Cutting Machine;
10, 12m Mesh Flipping Machine;
11, Mesh Winding Machine;
12, 24-meter Roller Conveyor belt;
Model | GWC2500QJ | GWC2900QJ | GWC3300QJ |
Max Mesh Width (mm) | 2500 | 2900 | 3300 |
Space of Longitude(mm) | 100 to 300 (adjust step =50) | ||
Space of Transverse(mm) | 100 to 400 | 100 to 300 | 100 to 300 |
Wire Diameter(mm) | 6 to 12 | ||
Count. of Weld Joints | 24 | 28 | 32 |
Capacity of Transformer | 160KVA 12 units | 160KVA 14 units | 160KVA 16 units |
Weld Pressure Type | Piston | ||
3 Phases of AC | 380V 50HZ | ||
Section Area of Single Power Supply Wire (mm²) | 300 ( mm2)/phase, Total 3 wires | ||
Weld Mode | SCR-Silicon Controlled Rectifier Synchronous Control | ||
Weld Power Supply | tap-changing transformers | ||
Transverse Wire Feed Method | Coiled Wire Rod | ||
Longitudinal Wire Feed Method | straight steel bar
| ||
Water Cooling System | water cooled Transformer | ||
Weld Speed | 40—60 times/min | ||