This production line utilizes fully automated CNC technology to weld steel bars into mesh products. Therefore it is not only speedy but precise. These products are widely used in many areas, such as civil, public, construction, highways, hydraulic, bridges, container terminals, and airport runways and other engineering projects and products. It is easy setting for mesh dimensions larger than 10 cm with increasing in increments of 50 mm. and it can guarantee welding mesh quickly, smoothly and seamless transitions from one welding dimension to the next one. The most critical feature of this system is its ability to weld steel mesh with both precision and speed, ensuring consistent and high-quality output.
1, Longitudinal Wire Coil Mount Rack,
2,Tail-end Sensor,
3, Longitudinal Wire Pre-Strengthening,
4, Longitudinal Wire Feeding,
5, Longitudinal Wire Feeding Buffer,
6, Longitudinal Wire Post-Strengthening,
7, Main Mesh Welder,
8, Transverse Wire auto-Feeding system,
9, Mesh Cutting Machine,
10, Mesh Winding Machine,
Model | GWC2500QJW | GWC2900QJW | GWC3300QJW |
Max Mesh Width (mm) | 2500 | 2900 | 3300 |
Space of Longitude(mm) | 100 to 300 (adjust step =50) | ||
Space of Transverse(mm) | 100 to 400 | 100 to 300 | 100 to 300 |
Wire Diameter(mm) | 3 to 6 | ||
Count. of Weld Joints | 24 | 28 | 32 |
Capacity of Transformer | 125KVA 12 units | 125KVA 14 units | 125KVA 16 units |
Weld Pressure Type | Piston | ||
3 Phases of AC | 380V 50HZ | ||
Section Area of Single Power Supply Wire ( mm²) | 180 ( mm²)/phase, Total 3 wires | ||
Weld Mode | SCR-Silicon Controlled Rectifier Synchronous Control | ||
Weld Power Supply | tap-changing transformers | ||
Transverse Wire Feed Method | Coiled Wire Rod | ||
Longitudinal Wire Feed Method | Straightness bar
| ||
Water Cooling System | water cooled Transformer | ||
Weld Speed | 40—70 times/min | ||