This production line uses CNC technology to weld steel bars into meshes quickly and accurately. The products are widely used in industrial and civil construction projects. The mesh dimension above 10 cm can be freely adjusted in increments of 10 mm. Not only standard-shaped but irregular-shaped meshes with holes can be produced to meet special engineering requirements. Quick, seamless mesh size adjustments guarantee precise, efficient welding and consistent product performance.
1, General Loading Rack,
2, Main Mesh Welder,
3, Mechanical Transverse Bar Blanking,
4, 12-meter Welded Mesh Collection Rack,
5, 24-meter roller conveyor belt system
Model | GWC2500PJ | GWC2900PJ | GWC3300PJ |
Max Mesh Width (mm) | 2500 mm | 2900 mm | 3300 mm |
Space of Longitude(mm) | 100-300mm adjustable step=10mm
| ||
Space of Transverse(mm) | 100-400mm | 100-300mm | 100-300mm |
Wire Diameter(mm) | 6-12mm | 6-12mm | 6-12mm |
Count of Weld Joints | 24 | 28 | 32 |
Capacity of Transformer | 160KVA X12 units | 160KVA ×14 units | 160KVA ×16 units |
Weld Pressure Type | Cylinder | ||
3 Phases of AC | 380V 50HZ | 380V 50HZ | 380V 50HZ |
Section Area of Single Power Supply Wire mm² | 300 mm²/phase
| ||
Welding Mode | SCR-Silicon Controlled Rectifier Synchronous Control | ||
Welding Power Supply | Micro tap-changing transformers
| ||
Transverse Wire Feed Method | Straightened bar | ||
Longitudinal Wire Feed Method | Straightened bar | ||
Water Cooling System | Water Cooled Transformer | ||
Welding Speed | 40—60 strikes/min | ||