This production line utilizes fully automated CNC technology to weld steel bars into mesh products. Therefore, it is not only speedy but precise. The products are widely used in many areas, such as civil, public, construction, highways, hydraulic, bridges, container terminals, and airport runways and other engineering projects. For mesh dimensions above 10 cm with increasing in increments of 50 mm, this production line can guarantee welding mesh quickly, smoothly and seamless transitions from one mesh dimension to the next one. The most critical feature of this system is its ability to weld steel mesh with both precision and speed, ensuring consistent and high-quality output.
· Double Longitudinal Bar Hopper Wire Dispensing Unit
· Main Welding Machine
· Cross Bar Storage Rack with Sorting and Blanking Mechanism
· Mesh Stepping Forward Servo Mechanism (Pulling System)
· Automatic Mesh Grabbing and Stacking System
Parameters | Unit | Value | Note | |
Diameter of Steel Bar | mm | Ф3.0-Ф8.0 | ||
Max of Mesh Width | mm | 2500 | ||
Mesh Size | Space of Longitude bar | mm | 100 | |
Space of Transvers bar | mm | 100--400(steeples adjustable) | ||
No. Weld Joints | Points | 25 | ||
Strikes of Weld | Times/min | 50--70 | ||
Max Steel Bar Diameter | mm | ￠8+￠8 | ||
Total Electrode Transformer Capacity | KVA | 160×7 | ||
Main Transformer Capacity | KVA | 200-315KVA（<150M） | ||
Welding Transformer Duty Cycle | 30% | |||
Power Supply Voltage | V | 380 | ||
Power Supply Frequency | Hz | 50 | ||
System Pneumatic Pressure | Mpa | ≥0.6 | ||
Cooling Water Pressure | Mpa | 0.2≤P<0.3 | ||
Compressed Air Consumption | M3/min | ≥3 | ||
Longitudinal Bar Feeding | Straight bars, straightness ≤ 3 mm / 1000 mm | |||
Transverse Bar Blanking | ||||